ADFS – A Geeks World

Error 500 in Azure Pack when using ADFS

I’ve had a couple of customers lately who’s had sudden issues with Azure Pack reporting a error 500 when used in combination with ADFS after logging on.

It’s because the ADFS Certificate has been updated and the thumbprint in WAP doesn’t match the one presented from ADFS anymore.

Mark has made a great post about it here (all credits to him for the solution): Error 500 Azure Pack tenant portal – Jwt10329 Error

I’ve modified Mark’s script a little bit so I can easily run it at various customers without modifying the URL’s. It will basically read the old value from the config and re-use that hostname for the ADFS dns entry.

This script assumes you are using ADFS for both the tenant and admin sites.

Import-Module -Name MgmtSvcConfig

$DBHOST = "MSSQL01"
$DBUSER = "SA"
$DBPASS = "Password"

$connectionstring = "Server=$DBHOST;Initial Catalog=Microsoft.MgmtSvc.Store;User ID=$DBUSER;Password=$DBPASS"
Test-MgmtSvcDatabase -ConnectionString $ConnectionString -Schema Config

$TargetTenant = Get-MgmtSvcRelyingPartySettings -ConnectionString $connectionstring -Target Tenant
$TargetAdmin = Get-MgmtSvcRelyingPartySettings -ConnectionString $connectionstring -Target Admin
$TargetMembership = get-MgmtSvcIdentityProviderSettings -ConnectionString $connectionstring -Target Membership
$TargetWindows = get-MgmtSvcIdentityProviderSettings -ConnectionString $connectionstring -Target Windows

Set-MgmtSvcRelyingPartySettings -Target Admin -MetadataEndpoint ("https://"+$TargetAdmin.Endpoint.Host+"/FederationMetadata/2007-06/FederationMetadata.xml") -ConnectionString $ConnectionString #-DisableCertificateValidation
Set-MgmtSvcIdentityProviderSettings -Target Windows -MetadataEndpoint ("https://"+$TargetWindows.ReplyTo.Host+"/FederationMetadata/2007-06/FederationMetadata.xml") -ConnectionString $ConnectionString #-DisableCertificateValidation
Set-MgmtSvcRelyingPartySettings -Target Tenant -MetadataEndpoint ("https://"+$TargetTenant.Endpoint.Host+"/FederationMetadata/2007-06/FederationMetadata.xml") -ConnectionString $ConnectionString #-DisableCertificateValidation
Set-MgmtSvcIdentityProviderSettings -Target Membership -MetadataEndpoint ("https://"+$TargetMembership.ReplyTo.Host+"/FederationMetadata/2007-06/FederationMetadata.xml") -ConnectionString $ConnectionString #-DisableCertificateValidation

Import-Module -Name MgmtSvcConfig

$DBHOST = "MSSQL01"

$DBUSER = "SA"

$DBPASS = "Password"

$connectionstring = "Server=$DBHOST;Initial Catalog=Microsoft.MgmtSvc.Store;User ID=$DBUSER;Password=$DBPASS"

Test-MgmtSvcDatabase -ConnectionString $ConnectionString -Schema Config

$TargetTenant = Get-MgmtSvcRelyingPartySettings -ConnectionString $connectionstring -Target Tenant

$TargetAdmin = Get-MgmtSvcRelyingPartySettings -ConnectionString $connectionstring -Target Admin

$TargetMembership = get-MgmtSvcIdentityProviderSettings -ConnectionString $connectionstring -Target Membership

$TargetWindows = get-MgmtSvcIdentityProviderSettings -ConnectionString $connectionstring -Target Windows

Set-MgmtSvcRelyingPartySettings -Target Admin -MetadataEndpoint ("https://"+$TargetAdmin.Endpoint.Host+"/FederationMetadata/2007-06/FederationMetadata.xml") -ConnectionString $ConnectionString #-DisableCertificateValidation

Set-MgmtSvcIdentityProviderSettings -Target Windows -MetadataEndpoint ("https://"+$TargetWindows.ReplyTo.Host+"/FederationMetadata/2007-06/FederationMetadata.xml") -ConnectionString $ConnectionString #-DisableCertificateValidation

Set-MgmtSvcRelyingPartySettings -Target Tenant -MetadataEndpoint ("https://"+$TargetTenant.Endpoint.Host+"/FederationMetadata/2007-06/FederationMetadata.xml") -ConnectionString $ConnectionString #-DisableCertificateValidation

Set-MgmtSvcIdentityProviderSettings -Target Membership -MetadataEndpoint ("https://"+$TargetMembership.ReplyTo.Host+"/FederationMetadata/2007-06/FederationMetadata.xml") -ConnectionString $ConnectionString #-DisableCertificateValidation

Just update the HOST, Username and Password and run the script on the AdminSite server. When done, logon to AzurePack as normal.

Import a Cryptographic New Generation (CNG) certificate as a Legacy cert to use with ADFS

The current version of ADFS (Active Directory Federation Services for Windows Server 2012 R2) unfortunately does not support Cryptographic New Generation (CNG) Certificates.
Though if you already have a CNG cert, and does not want to re-request a legacy cert from your provider, it’s possible to import a CNG as a Legacy cert by using this command.

certutil.exe -csp "Microsoft Enhanced RSA and AES Cryptographic Provider" -importpfx c:\temp\cng_cerficiate_file.pfx

1	certutil.exe -csp "Microsoft Enhanced RSA and AES Cryptographic Provider" -importpfx c:\temp\cng_cerficiate_file.pfx

And ADFS will then be able to use that certificate.

A Huge thanks to my colleague and security expert Hasain Alshakarti (Twitter: @Alshakarti Blog: http://secadmins.com/) for providing me with the solution.

URL Rewrite (redirect) of HTTP to HTTPS with Powershell script

When deploying Web Application Proxy as a frontend to for example ADFS and Windows Azure Pack, or other services, the current version of Web AppProxy only supports HTTPS urls. It’s possible to use the “URL Rewrite” module for IIS to redirect users from HTTP to HTTPS. There are plenty of guides on internet on how to do that.
But I wanted to add that configuration to my WebApplication Proxy configuration script, and couldn’t find any powershell examples, so here is the script I’ve made.

It will use Web Platform installer to install the URL Rewrite module, then add the IIS Web Management tools, and in the end create a Global Rule redirecting all HTTP requests to HTTPS without the user noticing it.

##### 
# Install URL Rewrite 
#
write-host Downloading WebPlatform Installer
$source = "http://download.microsoft.com/download/F/4/2/F42AB12D-C935-4E65-9D98-4E56F9ACBC8E/wpilauncher.exe"
$destination = "$env:temp\wpilauncher.exe"
$wc = New-Object System.Net.WebClient
$wc.DownloadFile($source, $destination)

####Start WEB Platform Installer
Start-Process -FilePath $destination 

# Wait for Installation to Complete 
Start-Sleep -Seconds 30

# Web Platform Installer CommandLine Tool 
$WebPiCMd = 'C:\Program Files\Microsoft\Web Platform Installer\WebpiCmd-x64.exe'
Start-Process -wait -FilePath $WebPiCMd -ArgumentList "/install /Products:UrlRewrite2 /AcceptEula /OptInMU /SuppressPostFinish" 

# Add Management Tools 
Add-WindowsFeature Web-Server -IncludeManagementTools
import-module webAdministration

# Create URL Rewrite Rules
Add-WebConfigurationProperty -pspath 'MACHINE/WEBROOT/APPHOST' -filter "system.webserver/rewrite/GlobalRules" -name "." -value @{name='HTTP to HTTPS Redirect'; patternSyntax='ECMAScript'; stopProcessing='True'}
Set-WebConfigurationProperty -pspath 'MACHINE/WEBROOT/APPHOST' -filter "system.webserver/rewrite/GlobalRules/rule[@name='HTTP to HTTPS Redirect']/match" -name url -value "(.*)"
Add-WebConfigurationProperty -pspath 'MACHINE/WEBROOT/APPHOST' -filter "system.webserver/rewrite/GlobalRules/rule[@name='HTTP to HTTPS Redirect']/conditions" -name "." -value @{input="{HTTPS}"; pattern='^OFF$'}
Set-WebConfigurationProperty -pspath 'MACHINE/WEBROOT/APPHOST' -filter "system.webServer/rewrite/globalRules/rule[@name='HTTP to HTTPS Redirect']/action" -name "type" -value "Redirect"
Set-WebConfigurationProperty -pspath 'MACHINE/WEBROOT/APPHOST' -filter "system.webServer/rewrite/globalRules/rule[@name='HTTP to HTTPS Redirect']/action" -name "url" -value "https://{HTTP_HOST}/{R:1}"
Set-WebConfigurationProperty -pspath 'MACHINE/WEBROOT/APPHOST' -filter "system.webServer/rewrite/globalRules/rule[@name='HTTP to HTTPS Redirect']/action" -name "redirectType" -value "SeeOther"

#####

# Install URL Rewrite

write-host Downloading WebPlatform Installer

$source = "http://download.microsoft.com/download/F/4/2/F42AB12D-C935-4E65-9D98-4E56F9ACBC8E/wpilauncher.exe"

$destination = "$env:temp\wpilauncher.exe"

$wc = New-Object System.Net.WebClient

$wc.DownloadFile($source, $destination)

####Start WEB Platform Installer

Start-Process -FilePath $destination

# Wait for Installation to Complete

Start-Sleep -Seconds 30

# Web Platform Installer CommandLine Tool

$WebPiCMd = 'C:\Program Files\Microsoft\Web Platform Installer\WebpiCmd-x64.exe'

Start-Process -wait -FilePath $WebPiCMd -ArgumentList "/install /Products:UrlRewrite2 /AcceptEula /OptInMU /SuppressPostFinish"

# Add Management Tools

Add-WindowsFeature Web-Server -IncludeManagementTools

import-module webAdministration

# Create URL Rewrite Rules

Add-WebConfigurationProperty -pspath 'MACHINE/WEBROOT/APPHOST' -filter "system.webserver/rewrite/GlobalRules" -name "." -value @{name='HTTP to HTTPS Redirect'; patternSyntax='ECMAScript'; stopProcessing='True'}

Set-WebConfigurationProperty -pspath 'MACHINE/WEBROOT/APPHOST' -filter "system.webserver/rewrite/GlobalRules/rule[@name='HTTP to HTTPS Redirect']/match" -name url -value "(.*)"

Add-WebConfigurationProperty -pspath 'MACHINE/WEBROOT/APPHOST' -filter "system.webserver/rewrite/GlobalRules/rule[@name='HTTP to HTTPS Redirect']/conditions" -name "." -value @{input="{HTTPS}"; pattern='^OFF$'}

Set-WebConfigurationProperty -pspath 'MACHINE/WEBROOT/APPHOST' -filter "system.webServer/rewrite/globalRules/rule[@name='HTTP to HTTPS Redirect']/action" -name "type" -value "Redirect"

Set-WebConfigurationProperty -pspath 'MACHINE/WEBROOT/APPHOST' -filter "system.webServer/rewrite/globalRules/rule[@name='HTTP to HTTPS Redirect']/action" -name "url" -value "https://{HTTP_HOST}/{R:1}"

Set-WebConfigurationProperty -pspath 'MACHINE/WEBROOT/APPHOST' -filter "system.webServer/rewrite/globalRules/rule[@name='HTTP to HTTPS Redirect']/action" -name "redirectType" -value "SeeOther"

Microsoft Fabric (datacenter and private cloud) related Hotfixes

Here is the list of Hotfixes I’m deploying in our production environment and that I deploy regularly at customers. Those production environments are a Fabric (Private Cloud) running Hyper-V, Storage Spaces, SOFS, ADFS, Domain Controllers, Azure Pack, System Center, SQL Servers, and more, yes everything you need in a Fabric. Though not Exchange, Lync or Sharepoint etc. So this list might not be complete for your system.
And as always, use your own judgement which hotfixes you would like to deploy in your environment or not. Hotfixes are not tested as much as ServicePacks used to be, and Update Rollups are, so it’s possible there are problems with them.

My philosophy is that I like to have everything updated and reduce the risk of having a problem. The number of times I have had issues with a hotfix are, as far as I can remember one (1), including the several years I worked at Microsoft Premier support and were assisting customers with problems and now and then provided a hotfix for an issue. So I rather install hotfixes I know of and are relevant to reduce the risk of hitting a real problem than wait for that issue to actually happen and then find a hotfix or open a case with Microsoft.

A hotfix included all previous fixes for that module too, so when troubleshooting a problem, it’s common that Microsoft Support asks you to install hotfix X, Y and Z to get the components involved in the problem to the latest revision. Thus, it might look like some of the KB Articles and hotfixes below does not apply to you, or you don’t have that problem in your environment. But if it’s related to Cluster, Hyper-V or any other component that you do use, it might be wise to install it anyway as it could fix 10 other problems that you are not aware of.

I’ll always import the updates directly into WSUS and deploy them, so I can use approval rules and see reporting of which updates has been installed where. Here is a good guide for how to do it; http://www.thirdtier.net/2013/03/how-to-manually-add-a-hotfix-to-wsus/

There is as far as I know (and I’ve also asked Premier Support) no way to script the import of updates into WSUS directly from Windows Catalog. You will have to manually use a Web Browser to import them. Click, Click, Click, wait, Click, Click….

The list is ordered by release date so the latest hotfixes are at the top. And looking at a fresh Fabric deployment, it looks like most hotfixes older than 10/14/2014 has been superseded, except for KB2965733 which was still needed by a couple of servers in this new fresh environment. But things might be different for you.

I’ve also written a Powershell Script for SCVMM to create Baselines and import all Updates and Hotfixes there. So it’s easy to use compliance scans and use remediation from SCVMM to keep the Fabric updated.
You can find it here; https://gallery.technet.microsoft.com/scriptcenter/SCVMM-Automatic-Baseline-8779597b

It’s not that easy to find new hotfixes or to know which ones are mandatory. Luckily, there is a blogpost to help you out. I’ve collected all sources from Microsoft product teams, where they list the hotfixes they recommend.
You can find the lists here: http://www.isolation.se/list-of-resources-to-find-hotfixes-and-updates-for-windows-server-2012-r2/

Anyway, here is the long list of fixes for possible problems in your environments. Updated: 7/22/2015

Hyper-V cluster unnecessarily recovers the virtual machine resources in Windows Server 2012 R2

http://support.microsoft.com/kb/3072380 Released: 7/14/2015

Virtual machines that host on Windows Server 2012 R2 may crash or restart unexpectedly
http://support.microsoft.com/kb/3068445 Released: 7/14/2015

Added 07/22/2015 “0xc0000017” error when you restart a UEFI-based computer in Windows
https://support.microsoft.com/kb/3072381 Released: 7/13/2015

Interrupts to the Intelligent Platform Management Interface driver are missed in Windows Server 2012 R2
http://support.microsoft.com/kb/3061460 Released: 6/9/2015

Unexpected ASP.Net application shutdown after many App_Data file changes occur on a server that is running Windows Server 2012 R2
http://support.microsoft.com/kb/3052480 Released: 6/9/2015

Update adds support for compound ID claims in AD FS tokens in Windows Server 2012 R2
http://support.microsoft.com/kb/3052122 Released: 6/9/2015

Update to improve the backup of Hyper-V Integrated components in Hyper-V Server 2012 R2
http://support.microsoft.com/kb/3063283 Released: 6/9/2015

Stop error code 0xD1, 0x139, or 0x3B and random crashes in Windows Server 2012 R2
http://support.microsoft.com/kb/3055343 Released: 5/12/2015

Backup application that calls the VSS service becomes unresponsive when the DFSR service is running in Windows
http://support.microsoft.com/kb/3054249 Released: 5/12/2015

Resolution of external DNS records on a Windows Server 2012 R2 Hyper-V guest cluster fails through a Hyper-V Network Virtualization Gateway
http://support.microsoft.com/kb/3049448 Released: 5/12/2015

Shared Hyper-V virtual disk is inaccessible when it’s located in Storage Spaces on a Windows Server 2012 R2-based computer
http://support.microsoft.com/kb/3025091 Released: 5/12/2015

“The URL cannot be resolved” error in DirectAccess and routing failure on HNV gateway cluster in Windows Server 2012 R2
http://support.microsoft.com/kb/3047280 Released: 5/12/2015

Hyper-V host crashes and has errors when you perform a VM live migration in Windows 8.1 and Windows Server 2012 R2
http://support.microsoft.com/kb/3031598 Released: 4/14/2015

Hotfix enables AD FS token replay protection for Web Application Proxy authentication tokens in Windows Server 2012 R2
http://support.microsoft.com/kb/3042121 Released: 4/14/2015

“HTTP 400 – Bad Request” error when you open a shared mailbox through WAP in Windows Server 2012 R2
http://support.microsoft.com/kb/3042127 Released: 4/14/2015

Files cannot be copied when drive redirection is enabled in Windows 8.1 or Windows Server 2012 R2
http://support.microsoft.com/kb/3042841 Released: 4/14/2015

“STATUS_PURGE_FAILED” error when you perform VM replications by using SCVMM in Windows Server 2012 R2
http://support.microsoft.com/kb/3044457 Released: 4/14/2015

You cannot upgrade Hyper-V integration components or back up Windows virtual machines
http://support.microsoft.com/kb/3046826 Released: 4/14/2015

RDP session becomes unresponsive when you connect to a Windows Server 2012 R2-based computer
http://support.microsoft.com/kb/3047296 Released: 4/14/2015

“Your computer can’t connect to the remote computer” error because RD Gateway service freezes in Windows Server 2012 R2
http://support.microsoft.com/kb/3042843 Released: 4/14/2015

A SQL Server that is running in a Hyper-V virtual machine takes a long time to restore a database to a dynamic VHD
http://support.microsoft.com/kb/2970653 Released: 3/10/2015

DNS server does not try the second forwarder and other DNS improvements in Windows Server 2012 R2
http://support.microsoft.com/kb/3038024 Released: 3/10/2015

“0x000000D1” Stop error when you fail over a cluster group in Windows Server 2012 or Windows Server 2012 R2
http://support.microsoft.com/kb/3036614 Released: 3/10/2015

Hotfix for update password feature so that users are not required to use registered device in Windows Server 2012 R2
http://support.microsoft.com/kb/3035025 Released: 3/10/2015

AD FS cannot process SAML response in Windows Server 2012 R2
http://support.microsoft.com/kb/3033917 Released: 3/10/2015

Added 7/18/2015 “0x0000003B” or “0x0000007E” Stop error on a Windows-based computer that has 4K sector disks
https://support.microsoft.com/kb/3027108 Released: 2/10/2015

Custom values for various MPIO timers in Windows Server 2012 R2 may not be honored
http://support.microsoft.com/kb/3027115 Released: 2/10/2015

System may freeze if a reserved disk is mounted accidentally in Windows 8.1 or Windows Server 2012 R2
http://support.microsoft.com/kb/3027110 Released: 2/10/2015

RemoteApp window is too large or too small when you use RDP to run a RemoteApp application in Windows Server 2012 R2
http://support.microsoft.com/kb/3026738 Released: 2/10/2015

Operation fails when you try to save an Office file through Web Application Proxy in Windows Server 2012 R2
http://support.microsoft.com/kb/3025080 Released: 2/10/2015

You are not prompted for username again when you use an incorrect username to log on to Windows Server 2012 R2
http://support.microsoft.com/kb/3025078 Released: 2/10/2015

Hotfix to avoid a deadlock situation on a CSV file system volume on Windows Server 2012 R2
http://support.microsoft.com/kb/3022333 Released: 2/10/2015

You are prompted for authentication when you run a web application in Windows Server 2012 R2 AD FS
http://support.microsoft.com/kb/3020813 Released: 2/10/2015

Time-out failures after initial deployment of Device Registration service in Windows Server 2012 R2
http://support.microsoft.com/kb/3020773 Released: 2/10/2015

You are prompted for a username and password two times when you access Windows Server 2012 R2 AD FS server from intranet
http://support.microsoft.com/kb/3018886 Released: 2/10/2015

Cluster fixes for deadlock and resource time-out issues in Windows Server 2012 R2 Update 1
http://support.microsoft.com/kb/3023894 Released: 2/10/2015

RDS License Manager shows no issued free or temporary client access licenses in Windows Server 2012 R2
http://support.microsoft.com/kb/3013108 Released: 12/9/2014

iSCSI SAN server that’s running Windows Server 2012 R2 restarts unexpectedly on a high-speed network
http://support.microsoft.com/kb/3000123 Released: 11/11/2014

TRIM and UNMAP activities for thin provisioning on one volume block all activities on other volumes
http://support.microsoft.com/kb/2996802 Released: 11/11/2014

SMBv1 named pipe requests do not time out when the remote server hangs in Windows 7, Windows Server 2008, Windows 8.1, and Windows Server 2012 R2
http://support.microsoft.com/kb/2995054 Released: 10/14/2014

SMB 3.0 Transparent Failover feature does not work after you disconnect a drive cable in Windows
http://support.microsoft.com/kb/2991247 Released: 10/14/2014

WTSQuerySessionInformation API function always returns zero bytes for WTSIncomingBytes and WTSOutgoingBytes
http://support.microsoft.com/kb/2981330 Released: 10/14/2014

A network printer is deleted unexpectedly in Windows
http://support.microsoft.com/kb/2967077 Released: 8/12/2014

“0x00000018” Stop error when volumes are mounted in Windows Server 2012 R2 or Windows Server 2012
http://support.microsoft.com/kb/2973052 Released: 8/12/2014

Updates to improve the compatibility of Azure RemoteApp in Windows 8.1 or Windows Server 2012 R2
http://support.microsoft.com/kb/2977219 Released: 8/12/2014

Error 58 when an application calls BackupRead function to back up files that are shared by using SMB in Windows
http://support.microsoft.com/kb/2973055 Released: 7/8/2014

2965733 The guest cluster is not available to service users after failover in a Hyper-V Network Virtualization environment
https://support.microsoft.com/kb/2965733 Released: 6/10/2014

NFS version 4.1 and version 3 work unexpectedly in Windows Server 2012 R2 or Windows Server 2012
http://support.microsoft.com/kb/2934249 Released: 4/8/2014

CSV snapshot file is corrupted when you create some files on the live volume in Windows
http://support.microsoft.com/kb/2929869 Released: 4/8/2014

On-demand virus scan freezes in Windows
http://support.microsoft.com/kb/2904100 Released: 3/11/2014

Windows Server 2012 R2 or Windows 8.1 crashes when virtual volumes are exposed to hyper-v virtual machines
http://support.microsoft.com/kb/2925766 Released: 2/11/2014

iSCSI Target stops responding to requests in Windows Server 2012 R2
http://support.microsoft.com/kb/2919740 Released: 2/11/2014

Memory and deadlock issues for the RD Virtualization Host and RD Connection Broker role services in Windows 8.1
http://support.microsoft.com/kb/2908810 Released: 2/11/2014

Hotfix improves storage enclosure management for Storage Spaces in Windows 8.1 and Windows Server 2012 R2
http://support.microsoft.com/kb/2913766 Released: 1/14/2014

OffloadWrite is doing PrepareForCriticalIo for the whole VHD in a Windows Server 2012 or Windows Server 2012 R2 Hyper-V host
http://support.microsoft.com/kb/2913695 Released: 1/14/2014

Get-MgmtSvcToken to get a ADFS Token is broken

Last week, I spent hours trying to get Get-MgmtSvcToken to get a Admin Token from our ADFS server without succeeding.

Get-MgmtSvcToken

Creates an identity token.

Syntax
Parameter Set: Default
Get-MgmtSvcToken [-Type] TokenType {Adfs | Membership | MembershipAdfs | Windows | WindowsAdfs} [-AuthenticationSite] Uri [-ClientRealm] Uri [-AdfsAddress Uri ] [-AdfsRealm Uri ] [-DisableCertificateValidation] [-User PSCredential ] [ CommonParameters ]

				1
2

						Parameter Set: Default
Get-MgmtSvcToken [-Type] TokenType {Adfs | Membership | MembershipAdfs | Windows | WindowsAdfs} [-AuthenticationSite] Uri [-ClientRealm] Uri [-AdfsAddress Uri ] [-AdfsRealm Uri ] [-DisableCertificateValidation] [-User PSCredential ] [ CommonParameters ]

I tried every possible combination with both “-type WindowsADFS” and “-type ADFS” in combination with various URL’s that should have worked, but didn’t.

With the help of @vNiklas and @_marcvaneijk on Twitter, I was pointed to TechNet where there is a documented bug/error/problem with the Get-mgmtSvcToken command.
By writing this blog, I hope someone will find it through a search and save themselves some time as that TechNet article never showed up when I was searching.

Technet Article: Why can’t I get a token with the Get-MgmtSvcToken cmdlet?

And the solution is to use your own function instead like this;

function Get-AdfsToken([string]$adfsAddress, [PSCredential]$credential)
{
    $clientRealm = 'http://azureservices/AdminSite'
    $allowSelfSignCertificates = $true

    Add-Type -AssemblyName 'System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'
    Add-Type -AssemblyName 'System.IdentityModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'

    $identityProviderEndpoint = New-Object -TypeName System.ServiceModel.EndpointAddress -ArgumentList ($adfsAddress + '/adfs/services/trust/13/usernamemixed')
    $identityProviderBinding = New-Object -TypeName System.ServiceModel.WS2007HttpBinding -ArgumentList ([System.ServiceModel.SecurityMode]::TransportWithMessageCredential)
    $identityProviderBinding.Security.Message.EstablishSecurityContext = $false
    $identityProviderBinding.Security.Message.ClientCredentialType = 'UserName'
    $identityProviderBinding.Security.Transport.ClientCredentialType = 'None'

    $trustChannelFactory = New-Object -TypeName System.ServiceModel.Security.WSTrustChannelFactory -ArgumentList $identityProviderBinding, $identityProviderEndpoint
    $trustChannelFactory.TrustVersion = [System.ServiceModel.Security.TrustVersion]::WSTrust13

    if ($allowSelfSignCertificates)
    {
        $certificateAuthentication = New-Object -TypeName System.ServiceModel.Security.X509ServiceCertificateAuthentication
        $certificateAuthentication.CertificateValidationMode = 'None'
        $trustChannelFactory.Credentials.ServiceCertificate.SslCertificateAuthentication = $certificateAuthentication
    }

    $ptr = [System.Runtime.InteropServices.Marshal]::SecureStringToCoTaskMemUnicode($credential.Password)
    $password = [System.Runtime.InteropServices.Marshal]::PtrToStringUni($ptr)
    [System.Runtime.InteropServices.Marshal]::ZeroFreeCoTaskMemUnicode($ptr)

    $trustChannelFactory.Credentials.SupportInteractive = $false
    $trustChannelFactory.Credentials.UserName.UserName = $credential.UserName
    $trustChannelFactory.Credentials.UserName.Password = $password #$credential.Password

    $rst = New-Object -TypeName System.IdentityModel.Protocols.WSTrust.RequestSecurityToken -ArgumentList ([System.IdentityModel.Protocols.WSTrust.RequestTypes]::Issue)
    $rst.AppliesTo = New-Object -TypeName System.IdentityModel.Protocols.WSTrust.EndpointReference -ArgumentList $clientRealm
    $rst.TokenType = 'urn:ietf:params:oauth:token-type:jwt'
    $rst.KeyType = [System.IdentityModel.Protocols.WSTrust.KeyTypes]::Bearer

    $rstr = New-Object -TypeName System.IdentityModel.Protocols.WSTrust.RequestSecurityTokenResponse

    $channel = $trustChannelFactory.CreateChannel()
    $token = $channel.Issue($rst, [ref] $rstr)

    $tokenString = ([System.IdentityModel.Tokens.GenericXmlSecurityToken]$token).TokenXml.InnerText;
    $result = [System.Text.Encoding]::UTF8.GetString([System.Convert]::FromBase64String($tokenString))
    return $result
}

# Fill in values
$adfsAddress = 'https://adfshost'
$username = 'domain\username'
$password = 'password'
$securePassword = ConvertTo-SecureString -String $password -AsPlainText -Force
$credential = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList $username,$securePassword

$token = Get-AdfsToken -adfsAddress $adfsAddress -credential $credential 
$token

function Get-AdfsToken([string]$adfsAddress, [PSCredential]$credential)

{

$clientRealm = 'http://azureservices/AdminSite'

$allowSelfSignCertificates = $true

Add-Type -AssemblyName 'System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'

Add-Type -AssemblyName 'System.IdentityModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'

$identityProviderEndpoint = New-Object -TypeName System.ServiceModel.EndpointAddress -ArgumentList ($adfsAddress + '/adfs/services/trust/13/usernamemixed')

$identityProviderBinding = New-Object -TypeName System.ServiceModel.WS2007HttpBinding -ArgumentList ([System.ServiceModel.SecurityMode]::TransportWithMessageCredential)

$identityProviderBinding.Security.Message.EstablishSecurityContext = $false

$identityProviderBinding.Security.Message.ClientCredentialType = 'UserName'

$identityProviderBinding.Security.Transport.ClientCredentialType = 'None'

$trustChannelFactory = New-Object -TypeName System.ServiceModel.Security.WSTrustChannelFactory -ArgumentList $identityProviderBinding, $identityProviderEndpoint

$trustChannelFactory.TrustVersion = [System.ServiceModel.Security.TrustVersion]::WSTrust13

if ($allowSelfSignCertificates)

{

$certificateAuthentication = New-Object -TypeName System.ServiceModel.Security.X509ServiceCertificateAuthentication

$certificateAuthentication.CertificateValidationMode = 'None'

$trustChannelFactory.Credentials.ServiceCertificate.SslCertificateAuthentication = $certificateAuthentication

}

$ptr = [System.Runtime.InteropServices.Marshal]::SecureStringToCoTaskMemUnicode($credential.Password)

$password = [System.Runtime.InteropServices.Marshal]::PtrToStringUni($ptr)

[System.Runtime.InteropServices.Marshal]::ZeroFreeCoTaskMemUnicode($ptr)

$trustChannelFactory.Credentials.SupportInteractive = $false

$trustChannelFactory.Credentials.UserName.UserName = $credential.UserName

$trustChannelFactory.Credentials.UserName.Password = $password #$credential.Password

$rst = New-Object -TypeName System.IdentityModel.Protocols.WSTrust.RequestSecurityToken -ArgumentList ([System.IdentityModel.Protocols.WSTrust.RequestTypes]::Issue)

$rst.AppliesTo = New-Object -TypeName System.IdentityModel.Protocols.WSTrust.EndpointReference -ArgumentList $clientRealm

$rst.TokenType = 'urn:ietf:params:oauth:token-type:jwt'

$rst.KeyType = [System.IdentityModel.Protocols.WSTrust.KeyTypes]::Bearer

$rstr = New-Object -TypeName System.IdentityModel.Protocols.WSTrust.RequestSecurityTokenResponse

$channel = $trustChannelFactory.CreateChannel()

$token = $channel.Issue($rst, [ref] $rstr)

$tokenString = ([System.IdentityModel.Tokens.GenericXmlSecurityToken]$token).TokenXml.InnerText;

$result = [System.Text.Encoding]::UTF8.GetString([System.Convert]::FromBase64String($tokenString))

return $result

}

# Fill in values

$adfsAddress = 'https://adfshost'

$username = 'domain\username'

$password = 'password'

$securePassword = ConvertTo-SecureString -String $password -AsPlainText -Force

$credential = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList $username,$securePassword

$token = Get-AdfsToken -adfsAddress $adfsAddress -credential $credential

$token